These are sturdy double walled units with outer chamber made of M.S. sheet duly enamel painted with inner made up of anodized aluminum or S.S. sheet. The gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber is provided with ribs for adjusting perforated helves to convenient height. The door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. Temperature is controlled by "EGO/"JUMO"GERMAN hydraulic type capillary thermostat from ambient to 70° C ± 0.5° C. An L-shaped prismatic thermometer is fitted to unit for reading the chamber temperature. Air ventilators are also provided on the sides of unit . To work on 220 / 230 volts A.C. Supply.
INNER CHAMBER SIZE (WxDxH)
(a) 300 x 300 x 300 m.m.
(b) 355 x 355 x 355 m.m.
(c) 455 x 455 x 455 m.m.
(d) 455 x 455 x 605 m.m.
(e) 605 x 605 x 605 m.m.
(f) 605 x 455 x 910 m.m.
(g) 605 x 605 x 910 m.m.
Outer wall is made up of M.S. sheet duly painted and inside of S.S. the gap between inner and outer wall is filled with high grade mineral glass wool. Temp. range from ambient to 70°C is controlled by "JUMO"/ EGO" GERMAN capillary type thermostat with an accuracy of ± 0.5° C. The unit is provided with manual tilting device, so as to tilt the tray holding the eggs. To work on 220/230 volts AC supply. CAPACITY: (a) 50 eggs (b) 100 eggs (c) 200 eggs (d) 250 eggs
It has outer wall made of M.S. Sheet duly painted and inner wall made up of heavy gauge STAINLESS STEEL Sheet filled with high grade glass wool to avoid thermal loss. Besides outer double walled door, A full view inner glass door allows inspection of test samples without disturbing the inner chamber Conditions. Unit is supplied with three adjustable preformatted shelves. Temperature range from 5°C to 50°C±1°C is controlled by DUAL SETTING Digital Temperature Indicator-cum-Controller so as to set two Different temperatures for day and night. Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for orificial day light, and the cyclic illumination conditions are regulated by Automatic 0-24 hrs. Timer. When all the tubes are ON temperature form 15°C to 50°C ±1°C can be obtained. Humidity from ambient to 95% +3% RH is controlled by a controller at temperature ranging from ambient to 50°C and the same is achieved by means of injecting steam. Arrangements for increasing the humidity is provided and not for decreasing.
(a) Temp. 5°C above ambient to 60°C ±1°C , controlled by DIGITAL TEMPERATURE INDICATOR-CUM-CONTROLLER but without humidity arrangement. Inner Chamber size : 1.1 mtr. (W) X 2.3 mtr. (H) X1.1 mtr (D)
(b) -do- same as above but with controlled humidity up to 95% ± 3% RH. Inner Chamber Size : 1.1 mtr. (W) X 2.3 mtr. (H) X1.1mtr (D)
(c) -do- same as above but with temperature range from 10°C to 60°C. Inner Chamber Size : 1.1mtr. (W) X 2.3mtr. (H) X1.1mtr (D)
Laboratory glassware and Instruments
Tell us what you think!
We are constantly working to raise the bar on our products. If you have any questions or concerns about your experience, please let us know. Our support concierges are available 24/7.