WATER BATH RECTANGULAR

recktangular-water-bath-1498456854-3086843.jpeg

Made out of heavy gauge S.S. with concentric rings. Auto-cut heating elements are fitted to protect the same when bath gets dry. To work on 220/230 volts A.C. Supply.

(a) 300 x 250 x 100 mm (6 holes of 75mm dia)

(b) 355 x 405 x 100 mm (12 holes of 75mm dia)

SEROLOGICAL WATER BATH

serological-water-bath-500x500.jpg

These units are double walled with inner chamber made up of S.S. sheet and outside of M.S. duly enamel painted. The gap between the walls is filled with special grade glass wool in order to avoid thermal losses. A drain plug is also fitted to the unit. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as standard accessory. Temperature from ambient to 100°C is controlled by "EGO"/JUMO" GERMAN Hydraulic Capillary type thermostat with an accuracy of ± 0.5°C. Supplied complete with 220/230 volts A.C. supply.

WIDTH x HEIGHT x DEPTH

(a) 300 x 250 x175mm (for 2 rack)

(b) 330 x 300 x175mm (for 4 rack)

(c) 455 x 300 x175mm (for 6 rack)

(d) 605 x 300 x175mm (for 8 rack)

OPTIONAL ACCESSORIES :

(a) Stirring arrangement with 1/20 H.P. motor and speed regulator.

(b) Digital Temperature indicator - cum - Controller.

(c) PI Digital Temp. Indicator-cum-Controller [stirring arrangement compulsory]

HIGH PRECISION WATER BATH (WITH STIRRING ARRANGEMENT)

high-precision-water-bath-500x500.png

Double walled chamber has inner made up of thick S.S. and outer PCRC sheet duly enamel painted. A glass window is provided on the front side for an easy inside view. A high speed stirrer with a motor of 1/20HP is fitted to the unit for continuous stirring and thus maintaining a uniform temperature throughout. A speed regulator is provided on the front panel to control speed of the stirrer the heating mechanism comprises of set of heaters a sensitivity of ± 0.1° C + 1 Digit from ambient to 100° C. To work on 220 / 230 volts A.C. Supply. Chamber Size 430 x 240 x 265 mm OPTIONAL ACCESSORIES 

(a) Digital Electronic Temperature indicator - Cum - Controller

(b) PI Digital Temp Indicator-cum-Controller

 

WATER BATH INCUBATOR SHAKER (METABOLIC SHAKER)

metabolic-shaker-423.jpg

It is a double walled unit with inside made of thick S.S. sheet and outer of M.S. sheet duly enamel painted the paramedical lid made of S.S. prevents falling of condensed water droplets on the specimens. Heating is achieved through a immersion type heater and the temperature is controlled by "EGO"/JUMO GERMAN hydraulic type thermostat with an accuracy of ± 0.5°C. The bath has an oscillating tray riding on ball rollers oscillated through a geared variable speed motor. Shaking speed range is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flasks of 25ml or 50ml or 100ml or 250ml or 500ml or 1000ml as ordered by the users. (Kindly maintain the capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, L shaped thermometer cord and plug, to work on 220/230 volts A.C. supply. Available with heating arrangement only (having temperature range from ambient to 100°C) or with both heating and cooling arrangements (having temperature range from 5°C to 100°C).

 INSIDE SIZE

(a) 275 x 275 x 75mm

(b) 275 x 275 x 150mm

OPTIONAL ACCESSORIES

(a) Spare shaking tray test tube rack for part (a), (b) or (c)

(b) Digital Teperature Indicator-cum-Controller

(c) PI Digital Temp. Indicator-cum-Controller

REFRIGERATED WATER BATH (LOW TEMPERATURE)

REFRIGERATED WATER BATH (LOW TEMPERATURE).jpg

Mounted on a sturdy angle iron frame the inner chamber is made of thick S.S. and outer
of mild steel duly enamel painted. The gap between the inner and outer wall is filled
with high grade glass wool is order to prevent any loss of temperature. Fitted with ISI
maked compressor for effective cooling. Heating is brought about by immersion type
heating elements. Temperature range from 5°C to 90°C is controlled by Digital Temp.
Indicators -cum-Controller with an accuracy of ± 0.5 C. A high speed stirrer is fitted to
maintain temperature uniformity. The lid of bath is insulated double walled fixed with
hinges and is provided with locking arrangements.
Inner Chamber Size : 500 x 250xX 250 m.m.
OPTIONAL ACCESSORIES
(a) F.H.P. Pump for circulation the cooled liquid to external source.
(b) Automatic Voltage Stabilizer 3.0 KVA (TRIPLE RELAY)