WATER STILL (WALL MOUNTING)

WATER STILL (WALL MOUNTING).jpg

The unit is recommended for making pyrogen free distilled water of a very high degree of purity. Made out of S.S. special kettle element. The cock fitted to the unit is of brass C.P. A wall mounting clamp is provided with the unit but without rubber tubing. Supplied with cord and plug to work on 220/230 volts A.C. (a) 2 ltrs/hr. 2.0 KW (b) 4 ltrs/hr. 3.0 KW (c) 6 ltrs/hr. 4.5 KW (d) 8 ltrs/hr. 6.0 KW

WATER STILL (HEAVY DUTY MODEL)

Available in output capacity of 4 ltr/hr only it is very rugged and has a very long life as compared to the routine water still. All parts such as boiler, top cover and JOINTLESS condenser a ARGON ARC WELDED. Condenser can be frequently cleaned by opening thick S.S. sheet duly ARGON ARC WELDED. Condenser can frequently cleaned by opening the screws of removable condenser. To work on 220/230 volts A.C. (a) -do- but output capacityof 6 ltrs/hr.

WATER STILL (TABLE PATTERN-BARNSTEAD TYPE) (MADE OF STAINLESS STEEL)

WATER STILL (TABLE PATTERN-BARNSTEAD TYPE).jpg

Double walled construction with inner and outer chamber made of S.S. The condenser and top are also made of S.S. The raw water is first made of pass around the tubes in the condenser where it gets heated nearly to the boiling point thus economizing the heating energy. The heated water pass to the evaporator through a water level maintaining pipe. Excess water is let out through the drain. To work on 220/230 volts A.C. supply.

CAPACITY    LOAD

(a) 2 ltrs/hr. 2.0 KW

(b) 4 ltrs/hr. 3.0 KW

(c) 6 ltrs/hr. 4.0 KW

(d) 8 ltrs/hr. 5.0 KW

(e) 20 ltrs/hr. 8.0 KW

(f) 25 ltrs/hr. 10.0 KW